Hypertherm Echion User Manual

Installation
7
152 810770 Operator Manual Echion
Installation
Install the pump
Install the pump in a location that agrees with the requirements and recommendations for this
equipment. Refer to Specifications, which begins on page 135.

Hypertherm recommends installing the Echion pump on a level surface with a
difference in height of no more than8cm(1/4inch) between opposite ends.
CAUTION
Hydraulic, water, and electrical connections can become loose during shipping and normal
operation. Examine all connections at installation and during regular maintenance.
To connect the pump directly to an external control device, such as a CNC, refer to the CNC
manual and contact your OEM or a Hypertherm Technical Service Associate for information and
support.
These instructions are for a typical installation. It could be necessary to install the components in a
different order.

Hypertherm Echion Specifications

General

Brand	Hypertherm
Model	Echion
Category	Water Pump
Language	English