Preventive maintenance
Echion Operator Manual 810770 85
Add hydraulic fluid
The capacity of the hydraulic fluid tank is 120 L (32 gallons).
Parts, tools, and materials
Do this task when the pump is not operating.
1. Remove the top cover and the front panel. Refer to Inspect the pump on page 39 for
instructions.
2. Remove the filler cap.
3. Fill the tank with hydraulic fluid until the fluid is at the top mark on the sight gauge.
4. Install the filler cap.
Do not put too much hydraulic fluid in the tank.
Antiwear (AW) mineral oil or synthetic hydraulic
fluid, ISO viscosity grade (VG) 32 or 46
Recommended materials
Clean funnel
To Next Page
Loading...
Need help?
General
