Installation
168 810770 Operator Manual Echion
Stop Procedure Timers
The pump is idle when the intensifier stops stroking.
Pump Fault Behavior
Stop After Idle When this feature is on, the pump turns off after the idle duration timer expires.
Idle Duration This timer determines how long the pump is idle before it turns off.
The default is 10 minutes.
Stop Boost Pump This timer determines how long the pump is idle before the boost pump turns off.
The default is 180 seconds.
Boost Fault Monitor The system can monitor a boost pump for fault conditions. This turns monitoring on
or off.
Fan Fault Monitor The system can monitor a heat exchanger for fault conditions. This turns monitoring
on or off.
To Next Page
Loading...
