Hypertherm Echion - Page 92

Preventive maintenance
3
92 810770 Operator Manual Echion
Preventive maintenance
12. When Turn Off the Cutting Head flashes on the screen:
a. Turn
OFF the cutting head.
b. Touch the symbol to continue.
13. When Examine the Pump flashes on the screen:
a. Examine the pump for loose fittings or leaks.
b. Examine the attenuator connections for leaks.
c. Touch the symbol to continue.
 The main motor turns off.
 The primary operation screen opens.
14. Install the top cover and the front panel.
The pump is ready for operation.