Quick Start Guide ~ RCON PROFINET IO Specification ~
p111
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Operation
Table
of
Contents
2
Moving to “Backward End” / “Forward End”
Move the ELECYLINDER forward. Click [FW_e] “Forward end”.
(1)
Keep it being clicked when moving to the “forward end” or “backward end”.
Stop the click during operation and the ELECYLINDER starts to decelerate and
stop from that timing.
Move the ELECYLINDER backward. Click [BW_e] “Backward end”.
(2)
Home
Drive to
direction apart from
home position
“Simple data setting” window
“Simple data setting” window
(1)
Click
(2)
Click
Home
Drive to
direction towards
home position
Actuator starts moving!
Actuator starts moving!
Forward
Backward
To Next Page
Loading...
