IAI RCON Series - １Controller Wiring; Assembling RCON System

Quick Start Guide ~ RCON PROFINET IO Specification ~
p10
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Wiring
Table
of
Contents
１
Controller Wiring
Assembling RCON System
1
Link of Each Unit
(1) Turn the “operation parts” on the “link parts” to the open direction.
(2) Align the “link parts”, “positioning bosses” and “link connectors” to engage them
and insert them firmly.
(3) Turn the operation parts on the “link parts” among units
to the close direction to affix them.
RCON gateway unit / Driver unit /
SCON extension unit / Terminal unit /
SCON-CB-*-RC / 200V power supply unit
Items to prepare
Link Parts
Positioning Bosses
Link Connectors
Positioning
Bosses
Insert
firmly
(2)
(3)
(1)
Open Direction
Open Direction
Link Parts
Operation Parts
Link Parts
Operation Parts
Close Direction
Close Direction