Quick Start Guide ~ RCON PROFINET IO Specification ~
p28
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Wiring
Table
of
Contents
RCON-SC A00000000
RCON-SC-1
AXI： RCS4-SA7C
L=16, ST=300
Driver unit model number sticker
Model Code Described in “Actuator” Part
Make sure to check that the combination of a driver unit and an actuator is
matched before connecting the actuator. The model code of actuators available
for connection is described in the manufacturing label on the left side of each
driver unit or on the front panel.
RCON system
Actuator
RCS4-SA7C
RCS4-SA7C L=16 ST=300
AXⅠ
Match
Model
Lead
Stroke
Connect actuator to
driver unit (RCON-SC)
Actuator side surface
Model number shown in “MODEL”
on the actuator model number sticker
RCS4-SA7C-WA-200-16-300-T2-M-B
200V Driver Unit
(Model: RCON-SC-1)
Checking 200V driver unit and actuator model numbers
To Next Page
Loading...
