IAI RCON Series - Operation Check of Actuator

Quick Start Guide ~ RCON PROFINET IO Specification ~
p101
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Operation
Table
of
Contents
Click [Test] in the “Position data edit” window.
(1)
Supply Power to Motor in Actuator (Servo-on)
2
Servo-on!
“Position data edit” window
Once the servo turns on in the normal condition
for a motor in an actuator, the lamp showing
the servo-on status should turn on in green.
(2)
Green light on
Click [SW] .
(1)
(1)
Click
Switchover to Test Run Window
1
Servo-on = (Motor power on)
Operation Check of Actuator
“Position data edit” window
Switch the screen to the test run window in order to operate an actuator
connected to a controller from IA-OS.
(1)
Click
The screen switches and the items for test run should appear.
(2)