Quick Start Guide ~ RCON PROFINET IO Specification ~
p31
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Wiring
Table
of
Contents
3
Network Wiring
Pay attention to the orientation of the connector on the Ethernet cable, and put
it in until it makes a "click" sound.
1
Wiring to PROFINET IO network connector
Insert till
you get
click
feeling
Host PLC
(To be prepared by user)
Ethernet cable
(To be prepared by user)
REC system
RCON system
Switching hub
(To be prepared by user）
PROFINET IO port
In this manual, introduces an example for how to connect PLC S7-1200 Series
manufactured by Siemens and the RCON system.
For the Ethernet cable, use a straight cable of Category 5 or higher.
(Cable length: 100m or less and Aluminum tape and braided double cutoff
shielded cable recommended)
Keep the power supplies off at the PLC and the RCON system when performing
wiring work.
Connecting PLC and RCON system
Connection example
To Next Page
Loading...
