IAI RCON Series - RegistratingData to PLC

Quick Start Guide ~ RCON PROFINET IO Specification ~
p80
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Initial Setting
Table
of
Contents
“TIA Portal main” window
1
Connecting PC and PLC
Click found in the toolbar on the TIA Portal main window.
The “Download extension to device” window will be displayed.
Set up “PG/PC Interface Type” and “PG/PC Interface” from
the pulldown lists.
Click .
(1)
Click
“Download extension to device” window
* In the example, “PG/PC Interface Type”
is set to and “PG/PC Interface“
is set to
“Download extension to device”
window display
“Download extension to device” window
(2)
Click
(2)
Click
“PG/PC Interface Type”
“PG/PC Interface”
(3)
Click
Registrating Data to PLC
(1)
(2)
(3)