IAI RCON Series - Wiring between ELECYLINDER and EC Connection Unit

Quick Start Guide ~ RCON PROFINET IO Specification ~
p26
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Wiring
Table
of
Contents
RCON system / Actuator /
EC connection unit cable
Items to prepare
The ELECYLINDER connectable to the EC connection unit is Option: ACR only.
Also, when “ACR” option is selected, “PN” and “TMD2” options cannot be selected.
Insert until
it clicks
Insert until
it clicks
RCON system
ELECYLINDER Connection
Cable
ELECYLINDER
CB-REC2-PWBIO＊＊＊-RB
*Confirm Option
ACR is set
EC Connection Unit
(Model: RCON-EC-4)
Make sure to confirm that option ACR (RCON-EC connection specifications) is
selected for ELECYLINDER before connecting. The actuator model code is described
on the production label on the left side of the main unit.
Wiring between ELECYLINDER and EC Connection Unit
Dimensional Drawing for Power Supply / Communication
Cable 4-Way Connector Cable
Shown below is a dimensional drawing for the power supply / communication cable
for RCON-EC connection (4-way connector model code: CB-REC2-PWBIO***-RB).
The user can change the direction of ejection for this cable.
ELECYLINDER side EC Connection Unit side
（34.2）
（18）
L (Up to 10m Max.)
（30） （30）
（30）（60）
Reference Figure
for Ejection to
Top and Bottom
Reference Figure
for Ejection to
Left and Right
EC connection unit side details
（28.5）
（11.5）
（40） （17） （30）
（9.1）
（39.3）
Complement