Quick Start Guide ~ RCON PROFINET IO Specification ~
p22
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Wiring
Table
of
Contents
RCON system / Actuator /
Motor encoder cable
Items to prepare
Driver unit model number sticker
Model Code Described in “Actuator” Part
Make sure to check that the combination of a driver unit and an actuator is matched
before connecting the actuator. The model code of actuators available for connection
is described in the manufacturing label on the left side of each driver unit or on the
front panel.
Actuator side surface
RCON system
Model number shown in “MODEL”
on the actuator model number sticker
Actuator (RCP6-SA6C)
Connect an actuator to “top connector”
on a driver unit (RCON-PC-2)
RCP6-SA6C L=20 ST=600
AXⅠ
Match
Model
Lead
Stroke
２
Actuator Wiring
Motor
Encoder Cable
24V Driver Unit
(Model: RCON-PC-2)
Checking 24V driver unit and actuator model numbers
To Next Page
Loading...
