IAI RCON Series - Setting up Connected Devices

Quick Start Guide ~ RCON PROFINET IO Specification ~
p67
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Initial Setting
Table
of
Contents
The setting should be established to connect the RCON system to the PROFINET IO
master unit of PLC.
As a condition, establish the connection as shown below and supply power to each unit.
Setting up Connected Devices
Occupancy Information
IN 4 Word module : 1
OUT 4 Word module : 1
REC system RCON system
LAN Cable
Siemens Engineering System
for Automation Application
TIA Portal V15.1
SIEMENS PLC
CPU：1212C AC/DC/Rly
Model：6ES7 212-1BE40-0XB0
IP Address ：192.168.250.10
MAC Address ：B8 DC 87 00 03 24
PLC：IP Address
192.168.250.1
Subnet Mask
(Common in connection example)
255.255.255.0
Double-click found in the “Device” tab in the project tree
in the TIA Portal main window.
(1)
Double-
click
“TIA Portal main” window
1
Configuration of PLC and Communication Module
Occupancy Information
IN 4 Word module : 7
OUT 4 Word module : 7
IP Address ：192.168.250.11
MAC Address ：B8 DC 87 00 D0 BD
Switching hub
Connection example
(1)