Quick Start Guide ~ RCON PROFINET IO Specification ~
p90
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Initial Setting
Table
of
Contents
Status LED
Display
status
Contentof display
MS
Light ON
Normal Status
Blinking
No configuration information,
or scanner in idle status
Light ON
Fatal Malfunction (Not Possible to Recover)
Blinking
Light Malfunction (Possible to Recover)
NS
Light ON
Online / Communication link complete
Blinking
Online / Communication not linked
Light ON
Fatal communication error, IP address duplication error
Blinking
Connection timeout
Light OFF
No IP address
1
Checking Communication Status on RCON System Side
NS
RCON system
Confirm that the communication is established in normal condition by checking
the display status (color) of the LED lamps (MS and NS) on the front of the
gateway unit.
[LED status]
Communication
is normal
Check the communication between the PROFINET IO port and the RCON system.
In case of operating from PLC, set the
AUTO/MANU switch on the front of RCON
to the AUTO side.
to MANU side
MS
4
Confirming Network Communication Status
PLC / RCON system
Items to prepare
To Next Page
Loading...
