IAI RCON Series - ２Gateway Unit Setting; Launching IA-OS and Starting up Gateway Parameter Window

Quick Start Guide ~ RCON PROFINET IO Specification ~
p42
©2023 / IAI Corporation
STEP
３
STEP
１
STEP
２
Initial Setting
Table
of
Contents
2
Gateway Unit Setting
PLC
Switching hub
PROFINET IO port
USB Cable
RCON system
IA-OS
RCON system / PC /
Communication cable
Items to prepare
For tool operations, it should be explained with IA-OS (Windows 10 for the PC OS
environment).
Connection example
Connecting PLC and RCON System
When connecting a USB cable to the controller “USB” Port, align the orientation
of the connector as shown in the figure in the red frame above to insert it.
Failure to do so may damage the connector.
1
Connecting Communication Cable for PC and Supplying Power
Connect a USB cable as shown in the figure below.
(1)
Connection Diagram
PC Side
USB Port
RCON Side
USB Port
USB Cable
(Use a generally sold product)
How to Connect
USB Cable
on Controller Side
USB Port
(mini-B)
Align the
connector
orientation
and insert
PC
RCON system
*RCON Side USB Connector: mini B type
Launching IA-OS and Starting up Gateway Parameter Window