IAI ssel

444
Appendix
(In the panel window, the three digits after “E” indicate an error number.)
Error No. Error name Description, action, etc.
C43 Character-string length error during string processing The character-string length used in string processing is invalid. Check the value
of character-string length defined by a SLEN command.
C45 Symbol definition table number error The symbol definition table number is invalid.
C46 Blank area shortage error with source-symbol storage table There is not enough area to store the source symbols. Check the number of
times source symbol can be used.
C47 Symbol search error Definitions are not found for the symbols used in the program steps.
C48 SIO-message continuous conversion error The transmitted SIO message does not match the message format or contains
invalid data. Check the transmitted message.
C49 SEL-SIO in-use error The SIO is being used by other interpreter task.
C4A SCIF unopen error Serial channel 1 opened to the user is not opened in the target task. Open the
channel using an OPEN command first.
C4B Delimiter non-definition error An end character is not defined. Set an end character using a SCHA command
first.
C4E SIO1 invalid usage OPEN error The usage of serial channel opened to the user does not match the parameter.
Check “I/O parameter No. 90, Usage of SIO channel opened to user.”
C4F SEL program/source symbol checksum error The flash ROM data has been destroyed.
C50 Symbol definition table checksum error The flash ROM data has been destroyed.
C51 Point data checksum error The flash ROM data has been destroyed.
C52 Backup RAM data (SBM) destruction error The backup SRAM data has been destroyed. Check the battery.
C53 Invalid flash-ROM SEL global data/error list error The SEL global data/error lists in the flash ROM are invalid.
C54 Flash-ROM SEL global data/error list duplication error The SEL global data/error lists in the flash ROM are duplicated.
C55 Flash-ROM erase count over error for SEL global data/error lists The number of time the flash ROM containing SEL global data/error lists can be
erased was exceeded.
C56 Timing limit over error (Flash ROM erase) Error erasing the flash ROM
C57 Flash-ROM verify error (Flash ROM erase) Error erasing the flash ROM
C58 Flash-ROM ACK timeout error (Flash ROM erase) Error erasing the flash ROM
C59 Head sector number specification error (Flash ROM erase) Error erasing the flash ROM
C5A Sector count specification error (Flash ROM erase) Error erasing the flash ROM
C5B Timing limit over error (Flash ROM write) Error writing the flash ROM
C5C Flash-ROM verify error (Flash ROM write) Error writing the flash ROM
C5D Flash-ROM ACK timeout error (Flash ROM write) Error writing the flash ROM
C5E Write-destination offset address error (Flash ROM write) Error writing the flash ROM