IBM P 615 series

Step 1549-4
Replace the following cards if present, one at a time:
v First location code item recorded, if any, in “Step 1549-1” on page 125.
v Second location code item recorded, if any, in “Step 1549-1” on page 125.
v Third location code item recorded, if any, in “Step 1549-1” on page 125.
v Processor card 1 at U0.1-P1-C1, if not recorded in “Step 1549-1” on page 125.
v Processor card 2 at U0.1-P1-C2, if not recorded in “Step 1549-1” on page 125.
Attention: Before replacing the system backplane, call support.
v CEC backplane at U0.1-P1, if not recorded in “Step 1549-1” on page 125.
Step 1549-5
Turn on the power.
126 EserverpSeries 615 Service Guide