IBM P 615 series

Table 5. Firmware Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
21A0 0002 SCSI DASD - test unit ready failed - sense data
available
Before replacing any system components, refer
to the notes in error code 21A0 0001.
1. Replace the media (removable media
devices).
2. Replace the SCSI device.
21A0 0003 SCSI DASD - send diagnostic failed - sense
data available
Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
21A0 0004 SCSI DASD - send diagnostic failed - DevOfl
cmd
Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
21E0 0001 SCSI tape - test unit ready failed - hardware
error
Before replacing any system components, refer
to the notes in error code 21A0 0001.
1. Replace the SCSI device.
2. Replace the SCSI cable.
3. Replace the SCSI controller.
21E0 0002 SCSI tape - test unit ready failed - sense data
available
Before replacing any system components, refer
to the notes in error code 21A0 0001.
1. Replace the media.
2. Replace the SCSI device.
21E0 0003 SCSI tape - send diagnostic failed - sense data
available
Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
21E0 0004 SCSI tape - send diagnostic failed - DevOfl cmd Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
21ED 0001 SCSI changer - test unit ready failed - hardware
error
Before replacing any system components, refer
to the notes in error code 21A0 0001.
1. Replace the SCSI device.
2. Replace the SCSI cable.
3. Replace the SCSI controller.
21ED 0002 SCSI changer - test unit ready failed - sense
data available
Before replacing any system components, refer
to the notes in error code 21A0 0001.
1. Replace the media.
2. Replace the SCSI device.
21ED 0003 SCSI changer - send diagnostic failed - sense
data available
Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
21ED 0004 SCSI changer - send diagnostic failed - DevOfl
cmd
Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
180 EserverpSeries 615 Service Guide