IBM P 615 series

Table 5. Firmware Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
2602 0007 Description: PCI device I/O or memory space request could not be satisfied
Action:
1. If the location code identifies a slot:
a. Reseat the adapter and reboot the system.
b. Replace the adapter.
c. Check for system firmware update. Apply update if available.
2.
If the location code identifies the CEC backplane or an I/O planar:
a. Check for system firmware updates. Apply if available.
b. Replace the CEC backplane or I/O planar.
3.
Call service support.
2602 0008 Description: PCI device Fcode evaluation error
Action:
1. If the location code identifies a slot:
a. Check for adapter firmware updates. Apply if available.
b. Replace the adapter.
c. Check for system firmware updates. Apply if available.
2.
If the location code identifies CEC backplane or an I/O planar:
a. Check for system firmware updates. Apply if available.
b. Replace the CEC backplane or I/O planar.
3.
Call service support.
Chapter 5. Error Code to FRU Index 185