IBM P 615 series

1. If a processor card is not plugged into slot one (U0.1-P1-C1), plug a processor card into the
slot.
2. If a processor card is plugged in slot one (U0.1-P1-C1), reseat the card in its connector. If
reseating the processor card does not fix the problem, replace it.
2310:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
2311: Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
2315:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
240A:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
240B:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
24FF:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
2504:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
2512:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
2513:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
2524:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
2526:
Informational message.
Actions: This is an informational message. No action is required by the customer or service
representative.
35EF:
The scan dump code was not able to successfully complete the request to close the connection to
the load source.
Actions:
This is an informational message. No action is required by the customer or service
representative.
9900:
Memory allocation failure during firmware update.
Actions:
210 EserverpSeries 615 Service Guide