Table 6. Service Processor Error Codes. (continued)
Error Code Description Action/ Possible Failing FRU
M0BT0001 The system hung during “Starting
Software...”. This error code is
generated by the customer performing
“Problem Determination” in the
Enterprise Server S80 pSeries 680
Model S85 User’s Guide.
Go to “MAP 1540: Minimum
Configuration” on page 117.
M0CON000 The system hung during SCSI POST.
This error code is generated by the
customer performing “Problem
Determination” in the Enterprise Server
S80 pSeries 680 Model S85 User’s
Guide.
Go to “MAP 1540: Minimum
Configuration” on page 117.
M0KBD000 The system hung during keyboard
POST. This error code is generated by
the customer performing “Problem
Determination” in the Enterprise Server
S80 pSeries 680 Model S85 User’s
Guide.
1. Service processor Location Code:
U0.1-P1-X1
2. Keyboard
M0KBD001 The system did not respond to a
keyboard entry. This error code is
generated by the customer performing
“Problem Determination” in the
Enterprise Server S80 pSeries 680
Model S85 User’s Guide.
Type 101 keyboard.
M0KBD002 The system did not respond to a
keyboard entry. This error code is
generated by the customer performing
“Problem Determination” in the
Enterprise Server S80 pSeries 680
Model S85 User’s Guide.
Type 102 keyboard.
M0KBD003 The system did not respond to a
keyboard entry. This error code is
generated by the customer performing
“Problem Determination” in the
Enterprise Server S80 pSeries 680
Model S85 User’s Guide.
Kanji-type keyboard.
M0MEM002 The system hung during memory POST.
This error code is generated by the
customer performing “Problem
Determination” in the Enterprise Server
S80 pSeries 680 Model S85 User’s
Guide.
Go to “MAP 1540: Minimum
Configuration” on page 117.
M0NET000 The system hung during network POST.
This error code is generated by the
customer performing “Problem
Determination” in the Enterprise Server
S80 pSeries 680 Model S85 User’s
Guide.
Go to “MAP 1540: Minimum
Configuration” on page 117.
Chapter 5. Error Code to FRU Index
183