IBM S85 pSeries 680 - Page 226

Reference
Code
Description/Action
(Perform all actions before exchanging Failing
Items)
Failing Item
8413 Invalid processor VPD. Record function code 19
from the operator panel. This function code is the
CCIN identifier which is used to determine the
processor or memory card type. To get the part
number for the failing card, find the CCIN number
in the parts tables under “Electronic Cards” on
page 556.
Processor card 0, M05
Location: U1.1-P1-C1
8414 Invalid processor VPD. Record function code 19
from the operator panel. This function code is the
CCIN identifier which is used to determine the
processor or memory card type. To get the part
number for the failing card, find the CCIN number
in the parts tables under “Electronic Cards” on
page 556.
Processor card 1, M18
Location: U1.1-P1-C2
8415 Invalid processor VPD. Record function code 19
from the operator panel. This function code is the
CCIN identifier which is used to determine the
processor or memory card type. To get the part
number for the failing card, find the CCIN number
in the parts tables under “Electronic Cards” on
page 556.
Processor card 2, M06
Location: U1.1-P1-C3
8416 Invalid processor VPD. Record function code 19
from the operator panel. This function code is the
CCIN identifier which is used to determine the
processor or memory card type. To get the part
number for the failing card, find the CCIN number
in the parts tables under “Electronic Cards” on
page 556.
Processor card 3, M16
Location: U1.1-P1-C4
8423 No processor VPD. Record function code 19 from
the operator panel. This function code is the CCIN
identifier which is used to determine the processor
or memory card type. To get the part number for
the failing card, find the CCIN number in the parts
tables under “Electronic Cards” on page 556.
1. Clock/processor regulator card, M19
Location: U1.1-P1-X2
2. Processor card 0, M05
Location: U1.1-P1-C1
8424 No processor VPD. Record function code 19 from
the operator panel. This function code is the CCIN
identifier which is used to determine the processor
or memory card type. To get the part number for
the failing card, find the CCIN number in the parts
tables under “Electronic Cards” on page 556.
1. Clock/processor regulator card, M19
Location: U1.1-P1-X2
2. Processor card 1, M18
Location: U1.1-P1-C2
8425 No processor VPD. Record function code 19 from
the operator panel. This function code is the CCIN
identifier which is used to determine the processor
or memory card type. To get the part number for
the failing card, find the CCIN number in the parts
tables under “Electronic Cards” on page 556.
1. Clock/processor regulator card, M19
Location: U1.1-P1-X2
2. Processor card 2, M06
Location: U1.1-P1-C3
1xxx
204
Service Guide