About this task
You must enter specific information into the management GUI. These tables help
you record the key values needed before the initial set up and initial configuration.
Legend for above graphic:
v 1 File storage path
v 2 Block storage path
v 3 Remote support services via internet
v A DNS server
v B NTP server
v C Email server
v D Authentication server
v E 10 Gbps Ethernet switch
v F Client machine
v G Client machine (fibre channel attached host)
v H Fibre Channel switch
v AA 1 Gbps Ethernet direct connection between the file modules
v BB 10 Gbps Ethernet network
v CC Fibre Channel network
v DD 1 Gbps Ethernet
v EE Fibre Channel direct connection from file module to node canisters
Required information:
123.123.123.102 123.123.123.104123.123.123.103
123.123.123.11
123.123.123.101
123.123.123.12
99.99.99.100
99.99.99.101
123.123.123.21
123.123.123.22
99.99.99.200
99.99.99.1
A
B
C
E
1
F
2
D
3
123.123.123.10
123.123.123.20
ifs00053
G
File Module 1 File Module 2
Node cannister 1 Node cannister 2
Control Enclosure
AA
BB
CC
DD
EE
V7000 Unified
H
Figure 12. Here are examples of IP addresses and network services needed for the system.
The expansion enclosures are not shown.
16 Storwize V7000 Unified: Quick Installation Guide