IBM System x3550 M3 Type 4254 Problem Determination And Service Guide

configuration information on a scheduled basis so that the information is available
to you and your support representative. It uses minimal system resources, and is
available free of charge. For more information and to download IBM Electronic
Service Agent, go to http://www.ibm.com/support/electronic/
POST
When you turn on the server, it performs a series of tests to check the operation of
the server components and some optional devices in the server. This series of tests
is called the power-on self-test, or POST.
Note: This server does not use beep codes for server status.
If a power-on password is set, you must type the password and press Enter, when
you are prompted, for POST to run.
If POST detects a problem an error message is displayed. See “POST error codes”
on page 27 for more information.
24 IBM System x3550 M3 Types 4254 and 7944: Problem Determination and Service Guide

IBM System x3550 M3 Type 4254 Specifications

General

Brand	IBM
Model	System x3550 M3 Type 4254
Category	Server
Language	English