IBM System x3750 M4 Type 8722 - Page 442

1. Replace microprocessor and memory expansion tray if installed.
2. Replace system board.
80070603-0B01ffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: IMM has detected Voltage Regulator Error.
Severity: Error
Alert Category: Critical - Power
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response: 10Gb-T VRD : Indicates a problem with either the voltage regulator for the 10Gb add in card or the
10Gb add in card itself
1. Check the IMM Web event log. This event may be a symptom of an earlier error.
2. Replace the Dual-port 10Gb-T (copper) Ethernet Adapter or the Dual-port 10Gb SFP+ (fibre) Ethernet Adapter if
installed.
3. Replace the system board.
80070603-2584ffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: IMM has detected Voltage Regulator Error.
Severity: Error
Alert Category: Critical - Power
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response: Power Supply : Indicates a problem with either the system board voltage or the power supply is
failing
1. Check the IMM Web event log. This event may be a symptom of an earlier error.
2. Replace any newly installed options.
3. Replace the power supplies.
4. Replace the power interposer card if installed.
5. Replace the system board.
80070603-0B01ffff • 80070603-2584ffff
426
System x3750 M4 Types 8722 and 8733: Installation and Service Guide