IBM X3850 X6 User Manual

138 IBM System x3850 X6 and x3950 X6 Planning and Implementation Guide
System Status
The first panel that you will see after completing the login credentials and setting your
time-out period, is the System Status and Hardware Health page, as shown in Figure 5-6.
This panel provides a quick summary review of the hardware status of the server.
Figure 5-6 IMM2 System Status panel
A green tick at the top menu bar indicates that all is working from a strict hardware point of
view. The IMM2 can check on the status of server components, the ServeRAID controllers,
and PCIe interfaces to most PCIe adapters.
The IMM2 does not check on the functional status of most PCIe adapters with regard to their
hardware connections to external devices. You will need to refer to the system event log from
within the operating system or the switch logs of the network and fibre switches to which the
server is connected to resolve connectivity issues.
When an actual hardware error is detected in the server, a red X will replace the green tick.
The Hardware Health summary at the bottom of the page will provide information about any
hardware errors presently unresolved in the server. This will also be represented by a red X.

IBM X3850 X6 Specifications

General

Chipset	Intel C602J
Network Controller	Integrated quad-port Gigabit Ethernet
Processor	Up to four Intel Xeon E7-4800 v2 series processors or Intel Xeon E7-8800 v2 series processors
Memory	Up to 6 TB of DDR3 ECC Registered DIMMs (RDIMMs) or Load-Reduced DIMMs (LRDIMMs)
Form Factor	4U rack server
Storage	Up to 24x 2.5" hot-swap SAS/SATA HDDs or SSDs
Expansion Slots	Up to 11 PCIe 3.0 slots
Power Supply	Up to four 1400W or 900W hot-swap power supplies
Memory Type	DDR3 RDIMM/LRDIMM
Storage Controller	ServeRAID M5210 SAS/SATA controller
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware