Icom IC-7610

20
2. ADVANCED OPERATIONS
Operating RTTY (FSK) (Continued)
D Setting the RTTY Automatic TX/RX
You can set to automatically transmit the RTTY
memory contents, or to automatically return to receive
after transmitting each memory (RT1 ~ RT8).
Selection Action
OFF
The selected memory contents are
displayed on the RTTY DECODE screen.
Push [F12] on the keyboard to transmit
the selected memory, and push [F12]
again to return to receive.
AUTO TX/RX
Automatically transmits the selected
memory and returns to receive.
AUTO TX
Automatically transmits the selected
memory, and then returns to receive by
pushing [F12] on the keyboard.
AUTO RX
The selected memory contents are
displayed on the RTTY DECODE screen.
Push [F12] on the keyboard to transmit
the selected memory, and then it
automatically returns to receive after
transmission.
1. Display the RTTY DECODE screen.
MENU
» DECODE
L The PSK mode screen slightly differs from the
RTTY mode.
2. Touch [TX MEM].
3. Touch [EDIT ].
4. 
  
5. Touch to select an option.
(Example: AUTO TX)
6. To exit the RTTY DECODE screen, push
EXIT
several times.