73
9. CLOCK AND TIMERS (ADVANCED)
Setting the Timers
D Setting the Sleep Timer
The Sleep Timer automatically turns OFF the
transceiver power when the set time period has
passed. You can set the timer to between 5 and 120
minutes, in 5 minute steps.
1. Push
for 1 second.
2. Touch “Sleep Timer.”
3. Rotate
to set the sleep timer.
(Example: 120 minutes)
4. Touch [SET] to save the setting and to start the
timer.
• The timer indicator on the
key turns ON.
• Approximately 10 seconds before the transceiver
power turns OFF, the indicator on the key starts
blinking.
L After the transceiver turns OFF, the Sleep Timer set
in step 3 is cleared.
L To pause and resume the timer while the timer is
running, push
.
5. To close the TIMER screen, push
.
To Next Page
Loading...
