11
2. ADVANCED OPERATIONS
VOX function
Mode: SSB, AM and FM
The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your
voice. This function enables hands-free operation.
D Adjusting the VOX function
Before using the VOX function, adjust the following
items.
• VOX GAIN
• ANTI VOX
• DELAY
• VOICE DELAY
1. Touch [VOX] for 1 second.
• Opens the VOX menu.
2. Touch the adjusting item.
(Example: ANTI VOX)
3. Rotate
to adjust the selected item.
L Adjust to the point where the transceiver does not
switch to transmit due to the sound from the speaker
or other devices.
L Touching VOICE DELAY selects “SHORT,” “MID,”
“LONG” or “OFF.”
D Turning ON the VOX function
1. Set the operating mode to SSB, AM or FM.
2. Touch [VOX] to turn ON the VOX function.
• “VOX” is displayed while the VOX function is ON.
VOX GAIN (Default: 50%)
Adjust the transmit/receive switching threshold level
to between 0% and 100% for VOX operation. Higher
values make the VOX function more sensitive to your
voice.
ANTI VOX (Default: 50%)
Adjust the ANTI VOX level to between 0% and 100%
to prevent unwanted VOX activation from the speaker
or other sounds. Higher values make the VOX
function less sensitive.
DELAY (Default: 0.2s)
Adjust the DELAY to between 0 and 2.0 seconds, for
a convenient interval for normal pauses in speech
before returning to receive.
VOICE DELAY (Default: OFF)
Set the VOICE DELAY to prevent picking up your
voice when switching to transmit.
Select “SHORT,” “MID,” “LONG” or OFF.
Displayed
L Touching [VOX] again turns OFF the VOX function.
To Next Page
Loading...
