Icom IC-7610

12. MAINTENANCE (ADVANCED)
85
Cleaning
DO NOT use harsh solvents such as
benzine or alcohol when cleaning,
because they will damage the
transceiver surfaces.
If the transceiver becomes dusty or dirty,
wipe it clean with a dry, soft cloth.
If a fuse blows, or the transceiver stops functioning,

replace the damaged fuse with a new, adequately
rated fuse.
L Spare fuses are supplied with the transceiver.
The fuses are installed in the DC power cable and in
the inside circuitry, to protect the transceiver.
• DC power cable fuses ................................ ATC 30 A
• Circuitry fuse ................................................ ATC 5 A
RWARNING!
• Disconnect the DC power cable from the transceiver
before replacing the fuse.
• NEVER
Replacing fuse
D DC power cable fuses
See the following illustration to replace the DC power
cable fuses.
ATC 30 A fuse