Icom IC-7610

56
6. SD CARD/USB FLASH DRIVE (ADVANCED)

You can load the Memory channels and transceiver’s


This function is convenient when:
L

TIP: Saving the current data is recommended before

 
MENU
» SET > SD Card > Load Setting
MENU
» SET > USB Flash Drive > Load Setting
 
 
L If you want to load all the contents on the LOAD

 
(Example: Antenna Memory)
• “✓
L The Set mode settings and Memory channel

 
• 
 
• After the loading ends, “COMPLETED! Restart the

L

 Turn the OFF transceiver power, then turn it ON
