52
5. VOICE TX MEMORY OPERATION
Transmitting a Voice memory content
You can transmit the Voice TX memory contents
once, or repeatedly. This is useful for transmitting
your call sign and contest name in some contests, or
repeatedly calling CQ.
D Transmitting
Transmits the prerecorded contents. (p. 50)
1. Display the VOICE TX screen.
»
VOICE
2. Touch the desired Voice TX memory key [T1] ~
[T8].
• Transmits the recorded content once.
3. To close the VOICE TX screen, push
.
The transmission’s remaining time
Transmitting
The SD card indicator next to the card
slot blinks while transmitting.
When a keyboard or keypad is connected:
• You can transmit the preset contents in the Voice
TX memory (T1 ~ T8) by pushing [F1] ~ [F8] on the
keyboard.
- Pushing [F1] ~ [F8] while holding down the [Shift]
key repeatedly transmits the contents.
» SET > Connectors > Keyboard/Mouse >
Keyboard [F1]-[F8] (VOICE)
• You can transmit the preset contents in the Voice
TX memory (T1 ~ T8) from an external device by
setting the “External Keypad,” and then connecting
an external keypad to [MIC] or [EXT KEYPAD] on
the IC-7610.
» SET > Connectors > External Keypad >
VOICE
To Next Page
Loading...
Need help?
General
