Icom IC-7610 Advanced Manual

51
5. VOICE TX MEMORY OPERATION
Entering a Voice TX memory name
You can assign a name to the recorded Voice
memories.
1. Open the VOICE TX RECORD screen.
MENU
»
VOICE > REC/SET > REC
2. Touch the Voice TX memory to enter the name
for 1 second.
L The selected memory needs to contain a
recording.
• Opens the QUICK MENU screen.
3. Touch “Edit Name.”
• Opens the Name editing screen.
4. Enter a name, and then touch [ENT] to save.
• The editing screen closes and returns to the VOICE
TX RECORD screen.
• The entered name is displayed.
5. To close the VOICE TX RECORD screen, push
EXIT
.
L The entered memory name is also displayed on the
VOICE TX screen.

Icom IC-7610 Specifications

General

Receiver Type	Direct sampling
Number of Antenna Connectors	2
Type	HF/50 MHz Transceiver
IF DSP	Yes
Antenna Connector	SO-239
Frequency Range	0.030–60.000 MHz
Power Supply	13.8 V DC ±15%
Modes	AM, FM
RF Output Power	100 W
Display	7-inch color
Weight	8.5 kg
External Speaker Connector	3.5 mm
USB Connector	Type B
Output Power	100 W
Operating Temperature	-10°C to +60°C