Icom iC-M605 - Page 65

55
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Receiving a Test
acknowledgement
1. When a Test acknowledgement is
received:
• Alarm sounds.
• The following screen is displayed
and the backlight blinks.
• “
” blinks.
2. Push any [Alarm Off] .
3. Push any [Close Call RCVD
Window]
.
• Enters the DSC Task mode.
DSC Task mode (pp. 29, 30)
• Rotate [CH/ENT] to view the call
contents.
4. Push [Standby] to return to
the Main screen.
[Ignore]*:
Ignores the Call and
returns to the Main screen.
* Displayed only when
“Single” is selected in the
PROCEDURE menu.
(p. 62)
[Hold]: Holds the RX call task,
and returns to the Main
screen.
[ACK ]:
Sends an acknowledgment.
[Accept]: Enters the DSC Task mode.
DSC Task mode (pp. 29, 30)
• Rotate [CH/ENT] to view the call
contents.
4. Push [Standby] to return to
the Main screen.
TIP: See page 44 for details of
sending an acknowledgement.