6
3
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Softkeys ■
The desired functions as described below can be assigned
in the Menu screen.
Scan [
] (p. 17)
Push to start or stop a Normal or Priority scan.
Dualwatch/Tri-watch [
] (p. 19)
Push to start a Dualwatch or Tri-watch. ➥
Push to stop a Dualwatch or Tri-watch when either is ➥
activated.
High/Low [
] (p. 14)
Push to set the power to high or low.
• Some channels are set to only low power.
Channel/Weather Channel [ ] (p. 11)
Push to select either the regular channels or the Weather
channels.
AquaQuake [
] (p. 15)
While holding down, the AquaQuake function is activated
to clear water away from the speaker grill.
Favorite channel [ ] (p. 18)
Push to set or clear the displayed channel as a Favorite ➥
(Tag) channel.
Hold down for 3 seconds to clear or set all Favorite ➥
channels in the selected channel group.
Name [
] (p. 16)
Push to enter the channel name programming mode.
Backlight [
] (p. 15)
Push to enter the LCD and key backlight brightness ad-
justment mode.
• While in the adjustment mode, push [∫]/[√][Ω]/[≈] to adjust the
brightness of the LCD and key backlight.
MOB [ ] (p. 71)
Push to enter “MOB” in the menu screen. ➥
Hold down for 1 second to memorize the current position ➥
as the MOB (Man OverBoard) point.
Waypoint [ ] (p. 74)
Push to enter “WAYPOINT” in the menu screen. ➥
➥
Hold down for 1 second to memorize the current position
as a Waypoint.
To Next Page
Loading...
Need help?
General
