Icom IC-M91D - 10 Menu Screen Operation

82
10
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Menu screen operation ■
The Menu screen is used for programming infrequently
changed values, function settings or sending DSC calls.
In addition to this page, se
e pages 84 through 88 for details.
Entering the Menu screen and operation D
Example: Set the channel group to “USA.”
Push [MENU]. q
Push [ w ∫]/[√] to select the root item
(Radio Settings), and then push [EN-
TER].
• If [∫] or [√] is continuously held down,
the items are sequentially highlighted.
Push [ e ∫]/[√] to select “CHAN Group,”
and then push [ENTER].
Push [ r ∫]/[√] to select “USA,” and
then push [ENTER] to set it.
• “✔” is displayed next to “USA.”
t Push [EXIT] to exit the Menu screen.
• Push [CLEAR] or [BACK] to return to
the previous screen.
Menu lists
[CLEAR]
[ENT]
[Y]/[Z]
[BACK]
[EXIT]
[MENU]
[ENTER]