Icom IC-M91D - DSC Operation - Group IDs and Deletion; Programming Group DSC IDs; Deleting DSC IDs

21
8
DSC OPERATION
N
ew
2001
N
e
w
Programming Group ID D
Enter “GROUP ID” in the DSC SETTINGS menu. q
Push [ADD]. w
• The “GROUP ID” program screen is displayed.
Enter a desired group ID in the following way: e
• Select a desired number using [Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, “←” or “→,” then push
[ENTER].
The fi rst digit is fi xed as ‘0’ for a Group ID.
The fi rst two digits are ‘0’ for any Coast station ID.
Repeat step re to input the specifi c 9 digits group code.
After entering the 9 digit code, push [ENTER] to set it. t
• The Group ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following way: y
• Select a desired character using [∫]/[√]/[Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, “←” or “→,” then push
[ENTER].
• Push [123], [!$?] or [ABC] to select a character group.
After entering the ID name, push [ u ∫]/[√]/[Ω]/[≈] to select
“FINISH,” then push [ENTER] to program it.
• The “GROUP ID” list screen is displayed.
Push [MENU] to exit the MENU screen. i
❮MENU❯ ➪ ❮DSC Settings❯ ➪ ❮ Group ID ❯
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)