Icom IC-M91D - DSC Operation - Channel Management; Automatic Acknowledgement Settings; Channel 16 Switch Function

35
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Position Request Call D
Transmit a Position Request Call when you want to know a
specifi c ship’s current position, etc.
Enter “POSITION REQUEST” in the DSC CALLS menu. q
❮MENU❯ ➪ ❮DSC Calls❯ ➪ ❮Position Request❯
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
Select the desired preprogrammed individual address, or w
“Manual Input,” using [Y]/[Z], then push [ENTER].
• The ID code for the Position Request Call can be set fi rst. (p. 20)
• When “Manual Input” is selected, set a desired 9 digit MMSI ID
code for the individual you wish to call.
About Manual Inputting:
Enter a desired individual ID in the following way:
• Select a desired number using [Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, “←” or “→,” then push
[ENTER].
• The fi rst digit is specifi ed as ‘0’ for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
• The fi rst two digits are ‘0’ for any coast station ID.
A confi rmation screen appears. e
• Confi rm the call contents.