Icom IC-M91D User Manual

66
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DSC Settings ■
D Position Input (See page 23)
D Add Individual ID/Group ID (See pages 20 and 21)
D Delete Individual ID/Group ID (See page 22)
D Automatic Acknowledgement
These items set the Automatic Acknowledgement function to
“Auto TX” or “Manual TX.”
When an Individual, Position Request, Polling Request or
Test Call is received, the transceiver automatically transmits
an Individual Acknowledgement, Position Reply, Polling Re-
ply or Test Acknowledgement Call, respectively.
When “INDIVIDUAL ACK” is set to “Auto TX,” the trans-
ceiver automatically transmits the Acknowledgment call
including “Unable to Comply” (No Reason Given) after re-
ceiving the Individual call.
q
Enter either “INDIVIDUAL ACK,” “POSITION ACK” or “TEST
ACK” in the DSC Settings menu.
❮MENU❯ ➪ ❮DSC Settings❯ ➪ ❮ Individual ACK ❯
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
❮MENU❯ ➪ ❮DSC Settings❯ ➪ ❮ Position ACK ❯
❮MENU❯ ➪ ❮DSC Settings❯ ➪ ❮ Test ACK ❯
Push [ w ] or [] to select “Auto TX” or “Manual TX,” then
push [ENTER].
• Push [BACK] to cancel and return to the DSC Settings menu.
(default: Manual)
(default: Auto TX)
(default: Auto TX)
Push [EXIT] to return to the normal operating mode. e

Icom IC-M91D Specifications

General

Brand	Icom
Model	IC-M91D
Category	Transceiver
Language	English