19
7
DUALWATCH/TRI-WATCH
Description ■
Dualwatch monitors Channel 16 while you are receiving on
another channel; Tri-watch monitors Channel 16 and the
call channel while receiving another channel. Dualwatch/Tri-
watch is convenient for monitoring Channel 16 when you are
operating on another channel.
DUALWATCH/TRI-WATCH SIMULATION
Dualwatch Tri-watch
Call
channel
Ch 88
Ch 16
Ch 88
Ch 16
Ch 88
Ch 9
• If a signal is received on Channel 16, Dualwatch/Tri-watch
pauses on Channel 16 until the signal disappears.
• If a signal is received on the call channel during Tri-watch,
Tri-watch becomes Dualwatch until the signal disap-
pears.
• To transmit on the selected channel during Dualwatch/
Tri-watch, hold down [PTT].
Operation ■
Select Dualwatch or Tri-watch in the Menu screen. (p. 84) q
Push [ w Y](CH) or [Z](CH) to select the desired operating
channel.
Push [DW] to start a Dualwatch or Tri-watch scan. e
• “DUAL 16” appears during Dualwatch; “TRI 16” appears during
Tri-watch.
• A beep tone sounds when a signal is received on Channel 16.
To cancel Dualwatch or Tri-watch, push [DW] again. r
[Example]: Operating Tri-watch on INT Channel 25.
Tri-watch starts.
Signal is received
on Call channel.
Tri-watch resumes after
the signal disappears.
Signal received on Chan-
nel 16 takes priority.
To Next Page
Loading...
Need help?
General
