Icom IC-M91D - DSC Operation - Settings; DSC Settings Overview; Position Input Settings

34
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Transmitting an All Ships call D
All ships, that have DSC transceiver, use Channel 70 as their
‘listening channel.’ When you want to announce a message to
these ships within range, use the ‘All Ships Call’ function.
Enter “ALL SHIPS CALL” in the DSC CALLS menu. q
❮MENU❯ ➪ ❮DSC Calls❯ ➪ ❮All Ships Call❯
(Push [MENU]) (Push [Y]/[Z] , then push [ENTER].)
Select a desired category, using [ w Y]/[Z], then push [EN-
TER].
• The selectable category may differ, depending on the pro-
grammed setting. Ask your dealer for the selectable categories.
Select a desired traffi c channel, using [ e Y]/[Z], then push
[ENTER].
• The selected channel is displayed.
A confi rmation screen appears. r
• Confi rm the call contents.
Push [CALL] to transmit the All Ships call. t
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the All Ships call has been transmitted, the following y
screen is displayed.
Announce the message using the microphone. u
After the announcement, push [EXIT] to return to the nor- i
mal operating mode.