Icom IC-M91D - Other Functions - Waypoint Management; Checking Stored Waypoints; Sorting and Navigating Waypoints

40
8
DSC OPERATION
N
ew
2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [CALL] to transmit the Polling Request Call. r
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
After the Polling Request Call has been transmitted, the t
following screen is displayed.
• The transceiver waits for an acknowledgment call on channel 70
for 10 secconds, then waits for a call by alternately monitoring
channel 70 and the operating channel.
When the acknowledgement call is received, beeps sound y
and the following screen is displayed.
Push [ALARM OFF] to stop the beeps, and then the screen u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode. i