Icom IC-M91D - Other Functions - Compass and GPS; Compass Screen Operation; GPS Status Screen Details

43
8
DSC OPERATION
N
ew
2001
N
e
w
Transmitting a Test Acknowledgement call D
When the “TEST ACK” in DSC settings is set to ‘Auto TX’
(p. 66), the transceiver automatically transmits a reply call
when receiving a Test call.
Quick ACK:
When a Test call is received, beeps sound and the screen q
shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK]. w
• Push [INFO] to display the Test call information.
Push [BACK] to return to the previous screen, or push [ACK].
The Test ACK confi rmation screen is displayed. e
Push [CALL] to transmit the acknowledgement call.
While transmitting the acknowledgement call, the screen r
shown below is displayed, and then returns to the normal
operating mode.