53
8
DSC OPERATION
ew
e
Receiving D a Distress Relay Call
When a Distress Relay call is received:
➥ The emergency alarm sounds for 2 minutes.
➥ “RCVD DISTRESS RELAY” pops up and the LCD back-
light blinks.
Push [ALARM OFF] to stop the alarm and the blinking q
backlight.
Push a softkey to select your desired action. w
[IGN]
➥ Push to return to the normal operating mode.
• The transceiver exits the DSC mode.
• By pushing [PTT], the transceiver also exits the DSC mode.
• “ ” continues to blink and the Call is stored in the Received
Call Log.
[INFO]
➥ Push to display the Received call information.
(p. 63)
[ACPT]
Push to accept the call. ➥
And then, push [CH 16] to switch the operating channel
to Channel 16, and then monitor it, as a coast station
may require assistance.
• If you haven’t pushed [CH 16] within 10 seconds, the operat-
ing channel automatically switches to Channel 16. (p. 67)
Push
To Next Page
Loading...
