iDect FC6A series User Manual

11: SD M EMORY C ARD
11-28 FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722
■ [PROGRAM_UPLOAD] section keys and parameters
*1 If the CPU module serial number cannot be correctly read, filename_option operates as if none was specified.
Restrictions
• The maximum number of characters per line is 512 single-byte characters including line feed codes. All the text on the line will be ignored if
there are more than 512 single-byte characters on the line.
• Each item must be described as a single line. If a line feed occurs before the end of the line, all characters after the line feed are ignored.
• Only line feed codes of the format generally supported by Windows (CR+LF) are supported. If any other line feed format is used, the
autoexec.ini file will fail to run properly.
• Data from a semicolon (;) to the line feed code is ignored. The space after the semicolon can be freely used for comments. However, if the
autoexec.ini file is opened in WindLDR and then saved again, comments written after the semicolon will be deleted and the file will only
contain standard comments.
• Only strings with single-byte characters can be used.
• If the same key appears multiple times, only the bottom key is valid.
auto_upload
Specifies whether or not to use the
auto upload function when there is no
ZLD file.
true
If the ZLD file specified by src_file does not
exist, an upload is executed instead of a
download. The file name of the ZLD file to
upload is specified by src_file.
false
false
If the ZLD file specified by src_file does not
exist, a download is not executed.
keep_output
Specifies whether or not to keep
output while the user program is
downloading.
true Keeps output while executing the download.
false
false
Does not keep output while executing the
download.
Key Description Parameter Default Value
dst_file
Specifies the name of the ZLD file that
will be uploaded to the SD memory
card.
Specify the name of a ZLD file in the FCDATA01 PROGRAM \\\
folder.
• The file name is enclosed in quotation marks (" ").
• The file name is a maximum of 128 characters.
However, when downloading the CPU module system
software, output is turned off regardless of this option's
setting.
"upload.zld"
filename_option
Specify to dynamically generate the file
name.
sn
The file will be created using the serial
number of the CPU module instead of the
dst_file file name.
If the serial number is "12A3456",
"12A3456.zld" is created.
*1
none
none
Creates the file using the name specified by
dst_file.
Key Description Parameter Default Value

iDect FC6A series Specifications

General

Brand	iDect
Model	FC6A series
Category	Controller
Language	English