EasyManua.ls Logo

Idis TR-4316 - Video Recording and Playback

Idis TR-4316
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Part 1 - Getting Started
19
Video Recording
Video recording will only take place if all the connections
are made correctly as per information contained in Part 2
of this operation manual.
For more information on video recording settings, refer
to the Record Setup on page 34.
Panic Recording
Select Live or Search menu’s Panic Recording icon or
press the Panic Recording button on the front panel or
the remote control to commence panic recording on all
registered cameras.
To stop Panic Recording, select the Panic Recording
icon or press the Panic Recording button again. If the
Panic Recording Duration option under Record Setup
> General has been congured, Panic Recording will
automatically terminate after the specied duration
of time has elapsed. For more information, refer to the
Record Setup on page 34.
Panic Recording takes place irrespective of any
recording schedule set up by the user.
Panic Recording ips, Quality, Resolution
from
Record Setup – General applies to all Panic
Recording videos.
Panic Recording will not take place if recording mode
is not set to Recycle and the HDD has reached 100%
of its capacity.
Audio Recording
If the Record Audio option under Record Setup >
General has been enabled the camera will record audio
along with video. For more information, refer to the
Record Setup on page 34.
Check your local laws and regulations on making
audio recordings.
Video Recording Playback
You can play back video recordings by using mouse or
remote control.
Login with an account that has search permission is
needed to playback video recordings.
The initial video playback point in Search mode is
the recording's last playback point or the end of the
recording data.
Audio playback of the selected recording is available
in full screen mode only.
Covert protection on cameras also applies to video
recording playback.
All Channel Playback
1
Press the Menu button while in Live mode.
2
Select the Search Mode icon and then select All
Channels.
3
The selected search mode will be initiated.
For more information on data search, refer to the Part 3 -
Search on page 61.

Related product manuals