IDS uEye series

To Next Page

To Previous Page

8 Applications

marking the start and end of the playback loop. To select the start position, use the mouse to drag

the position marker to the desired start position in the endless loop and then click the button.

Then, set the position marker to the desired end position using the same method. Click the

button to complete defining markers.

8.3.5 Video Window and Full Screen Mode

The video window is displayed dynamically. The possible display sizes are determined based on the

capture resolution and the screen resolution.

The video is played back at the same aspect ratio that was used for the capture.

To enable full screen mode, press the b+F keys. In this mode, you can use the keyboard for

playback control. To quit this mode, press ^or press b+Fagain.

Key combinations in full screen mode

b+F

Start/stop full screen mode

Quit full screen mode

b+O

Open video file

z (left arrow)

One frame back

x (right arrow)

One frame forward

k (spacebar)

Start/stop video playback