IDS uEye series User Manual

© 2009 IDS Imaging Development Systems GmbH 213
9 Specifications
9.4.2 GigE uEye
Figure 205: GigE uEye SE
status LEDs
Figure 206: GigE uEye
HE status LEDs
The two LEDs indicate the current status of the GigE uEye camera.
· LED 1: camera status
· LED 2: network status
Camera status (LED 1)
Camera is booting
Camera off
Starter firmware ok, waiting for connection
Connecting
Firmware update
Normal operation
Freerun mode
Single trigger mode
Group trigger mode *
)
Standby mode
Error
Camera hardware error
Configuration error
Starter firmware not ok, failsafe firmware enabled
Overtemperature (>65°C)

IDS uEye series Specifications

General

Sensor	CMOS
Interface	USB 2.0, USB 3.0, GigE
Shutter	Global or Rolling Shutter
Power Supply	Via USB or external power (depending on model)
Operating System	Windows, Linux
Mount	C-mount or CS-mount
Dimensions	29 x 29 x 29 mm