IDS uEye series

© 2009 IDS Imaging Development Systems GmbH84
User Manual uEye Cameras V3.32
Capture Errors
Select View menu ® Capture errors on the main menu to display the Capture Errors dialog box.
Figure 74: View menu - Capture errors
Error type
Description
#
API no destination memory
There is no destination memory for copying the finished
image.
1
API conversion failed
The current image could not be processed correctly.
2
API image locked
The destination buffers are locked and could not be
written to.
3
DRV out of buffers
No free internal image memory is available to the driver.
The image was discarded.
4
DRV device not ready
The camera is no longer available. It is not possible to
access images that have already been transferred.
5
USB transfer failed
The image was not transferred over the USB bus.
6
DEV timeout
The maximum allowable time for image capturing in the
camera was exceeded.
7
ETH buffer overrun
The sensor transfers more data than the internal camera
memory of the GigE uEye can accommodate.
8
ETH missed images
The GigE uEye camera could neither process nor output
an image captured by the sensor.
9