© 2009 IDS Imaging Development Systems GmbH42
User Manual uEye Cameras V3.32
Figure 42: Selecting a setup type
1.
Complete
Installs all components (recommended).
2.
USB and Gigabit Ethernet
Installs all USB and GigE components except source code and third-party drivers (e.g.
DirectShow or imaging libraries)
3.
USB
Installs all USB components except source code and third-party drivers
4.
Custom
When you choose custom installation, you have to individually select the components you want to
install. Custom installation is recommended only for advanced users.
If you need to make changes to an existing installation, you can do this with the custom
installation.
Once the software has been installed, the GigE uEye network service is automatically
bound to all local network adapters.
We recommend disabling the network service for all network adapters that will not be used
with the GigE uEye cameras. To disable the network service, open the ETH network
service dialog box in the uEye Camera Manager.
7.3 Uninstalling the uEye Drivers
To uninstall the uEye drivers, you also use the menu-driven uEye setup program.
Uninstalling the GigE uEye network service
The GigE uEye network service is uninstalled automatically when you uninstall the uEye driver.
After uninstalling the GigE uEye driver, you will have to restart your computer.
You can only reinstall the driver after restarting the computer.
To Next Page
Loading...
Need help?
General